3-60 Chapter 3: Setup
Boot Menu Options
Hard Drive Item Specific Help
ATAPI CD-Rom Drive
Removable Devices
Intel ® Boot Agent Version 4.0.17
This screen provides a list of devices that the terminal uses to boot the
system. To change the sequence of the devices, perform the following
steps:
1. Move the cursor to the Boot Sequence option on the Main Menu.
2. Move the cursor to select a device.
3. Press <+> to move it up the list, or <-> to move it down the list.
4. Move the cursor to the Exit Menu, select Save Changes & Exit or Save
Changes, and press Enter.
Note: Pressing ESC during POST causes the terminal to display
the Boot Menu instead of automatically following the configured
boot sequence specified in Setup.
Main Advanced Securit
To Next Page
Loading...
