1-34 Chapter 1: Product Overview
Additional Pentium III Connectors
The Pentium III board has an IRDA connector that is not on the
Pentium board. It is not used at this time.
A connector can be added on Pentium III models to add two additional
RS-232 ports. To add the ports, install the Dual RS-232 Port Kit
(7454-F072) as described in the Feature Kits appendix.
The following illustration shows the RS-232 Connector, which is part of
the Dual RS-232 Port Kit, installed on the Connector Row Bracket.
19106
IRDA
(Not used)
RS-232 Connector
(COM 3 and COM 4)
The Dual RS-232 Port Kit also includes the Dual RS-232 Cable. When
this cable is plugged into the Interface Cable Connector, the two
additional serial ports are available.
18002
To Next Page
Loading...
