NCR 7454 - System Monitors

Chapter 3: Setup 3-45
Disabled
CC00-CDFF
CE00-CFFF
D000-D1FF
Disabled
5
6
7
10
11
15
MSR Address
This option selects the memory address range used by the Magnetic
Stripe Reader.
1. Move the cursor to the MSR Address option.
2. Press Enter and then select the desired setting from the drop-down
menu.
MSR Interrupt
This option selects the interrupt used by the Magnetic Stripe Reader.
1. Move the cursor to the MSR Interrupt option.
2. Press Enter and then select the desired setting from the drop-down
menu.
System Monitors
Move the cursor to the System Monitors option and press Enter to view
this menu. This menu shows the monitored voltages, currents, and
temperatures. The items on this menu cannot be modified.