3-6 Chapter 3: Setup
Memory Cache
This option is used to specify your terminal to cache system memory.
Note: Cache memory must be present on the Processor Board in order
to use this option.
To set the memory cache, perform the following steps:
1. Move the cursor to the Memory Cache option on the Main Menu and
press Enter. The Memory Cache Menu appears.
System Time: [12:34:00] Item Specific Help
System Date[02/29/1997]
Memory Cache Item Specific Help
Memory Cache: [Enabled]
Cache System BIOS area: [Enabled]
Cache Video BIOS area: [Disabled]
2. Move the cursor to the Memory Cache option.
3. Press Enter and then select the desired setting from the drop-down
menu.
4. Set the other options on this menu as desired. Select Help for more
information.
5. Move the cursor to the Exit Menu, select Save Changes & Exit or Save
Changes, and press Enter.
Main
Main
PhoenixBIOS Setup Utility
Disabled
Enabled
To Next Page
Loading...
