3-62 Chapter 3: Setup
BIOS Default CMOS Values (Pentium III/Celeron)
The following are the BIOS default CMOS values for the workstation.
Note: When installing a new BIOS from the CD, the Processor Board
type is automatically detected and the correct BIOS is automatically
installed.
Main Values
Note: An asterisk (*) indicates a variable value based on system
specification, etc. .
System Time
*
System Date
*
Legacy Diskette A:
Disabled
Legacy Diskette B:
Disabled
Primary Master
2168 MB
Type Auto
Cylinders 4200
Heads 16
Sectors 63
Maximum Capacity 2168 MB
Multi-Sector Transfers 16 Sectors
LBA Mode Control Enabled
32 Bit I/O Disabled
Transfer Mode FPI0 4/DMA 2
Ultra DMA Mode Mode 2
Primary Slave
None
Type Auto
Multi-Sector Transfers Disabled
LBA Mode Control Disabled
To Next Page
Loading...
