EasyManua.ls Logo

NCR 7454 - Hardware Module Descriptions; Processor Board; Processor;Chip Set; Video Subsystem

NCR 7454
244 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1-8 Chapter 1: Product Overview
Hardware Module Descriptions
Processor Board
Processor/Chip Set
The terminal uses an Intel architecture processor, which permits it to
leverage existing software drivers and applications, as well as provide
the greatest flexibility in choosing an operating system. This provides
several other advantages:
Capable of SW MPEG-1 or MPEG-2 playback at 30 frames per
second with 22 KHz stereo audio (may be limited by OS
constraints)
Sound Blaster-compatible audio capability
Java Benchmark performance > 1000 Caffeinemarks, JIT compiled
OS support to run Java
Expansion capabilities for optional features and future
requirements (ISA/PCI bus and USB)
The processor is one of the following:
An Intel Celeron Processor (µPGA package), used with the Intel
440BX PC chipset. The 440BX chipset consists of the 82440BX
System Controller (North Bridge chip), also called the MTXC, and
the 82371AB (South Bridge chip), also called the PIIX4.
Video Subsystem
The video subsystem supports the following LCD types:
12.1-Inch active matrix (TFT) 800x600 with 64 k colors
Support for the LCD integrated display is provided internally. External
support for SVGA monitors (800x600 [or better] resolution and 64 K [or
better] colors) is provided by a CRT 15-pin D-shell connector.
The LCD brightness is software controlled. The terminal does not have
hardware controls for brightness or contrast.

Table of Contents

Other manuals for NCR 7454

Related product manuals