Appendix B: Feature Kits B-19
Installing the Windows 95 Drivers
1. After connecting the USB cable the Update Device Driver Wizard
dialog screen should appear.
2. Insert the Edgeport Driver disk into drive A.
3. Click on
Next to initiate a floppy drive search for the updated
driver device.
4. Click on
Finish to continue with the installation.
5. Click
OK at the Insert Disk screen.
6. Type
a: in the Copy File From field and then click OK.
Files will be copied from the disk to your system.
The Update Device Driver Wizard will appear a second time in order
to install support for Windows 95 communication ports. Follow the
instructions on the screen. Wait as ports are assigned.
Installation is complete when the dialog disappears. The new
communication ports are numbered sequentially, following the
existing ports in your system.
To Next Page
Loading...
