Chapter 3: Setup 3-39
Parallel Port
This option configures the parallel port.
1. Move the cursor to the Parallel Port option.
2. Press Enter and then select the desired setting from the drop-down
menu.
• Disabled – no configuration
• Enabled – user configuration
• Auto – BIOS or OS chooses configuration
• OS Controlled – (displayed when controlled by OS)
Mode
This option sets the mode for the parallel port.
1. Move the cursor to the Mode option.
2. Press Enter and then select the desired setting from the drop-down
menu.
Disabled
Enabled
Auto
Output only
Bi-directional
EPP
ECP
To Next Page
Loading...
