Chapter 4: Operating System Recovery 4-9
Furthermore, the following settings/revisions have been configured:
• Preinstalled W2K to include the Product ID Number (PID)
• Placed the Gold Drive Part Number, Date Created, LPIN, and
Release in Registry under:
HKey-Local_Machine\Software\NCR\Gold Drive
• Ran Sysprep, using sysprep.inf and sysprep.bat, so that the mini
installation will run on initial boot with the following parameters:
- Skip EULA
- Automatically include PID
• Established a FAT32 primary system partition that fills the entire
drive
• Included necessary OS cab files in C:\Install
• Installed SP1
• Made SP2 folder available in C:\Install (not installed)
• Exposed to both EM and EM+ video chipsets
• Exposed to a mouse so MicroTouch will install properly
• Installed SMI Control Panel
• Installed Intel Proset utility
• Set virtual memory to 192-394
• Enabled APM
• Set ‘APM monitor shutoff’ to ‘Never’
• ‘Enable PME’ (in Intel Proset utility) set to ‘Hardware Default’
• Disabled game port
• Enabled DMA
• Set color to 16 bit
Note: This product should only be used on 7454 terminals with a
Microsoft Windows 2000 license
To Next Page
Loading...
