4-22 Chapter 4: Operating System Recovery
10. The directory that Ghost is now looking in should be Z: (if not,
switch to Z). Select the
File name to load image from file
(nnnnnnn.gho) and press
Enter.
11. Select the
Local destination drive and press Enter.
12. Set the size of the first partition (which is FAT16) to 2 GB.
Note: In order to do this you may need to clear the amount from
the second partition.
13. Set the size of the second partition.
O/S Second Partition Format Second Partition Size
NT NTFS Fill the remaining drive space
Win2000 NTFS Fill the remaining drive space
Win98 FAT32 Fill the remaining drive space
Win95 FAT32 Fill the remaining drive space
DOS FAT16 2 GB
14. Press Enter.
15. If you are recovering from Win9x, it is likely that the second
partition will be too small for FAT32. If so, a dialog is displayed
Converting partition from FAT32 to FAT, proceed?
Choose
Yes.
16. At the next dialog box,
Proceed with disk load? Destination drive will be
permanently overwritten,
Choose
Yes to start the recovery process.
To Next Page
Loading...
