Chapter 5: BIOS Updating Procedures 5-7
8. Enter the update command:
EMBflash [Enter]
9. Select the number for the 7454 terminal from the menu list:
1) 7454
2) 7401
3) 7452
4) 7453
5) 7455
6) 7460
7) 7451
8) 7456
1 [Enter]
A blue screen displays as the program runs, showing the program
progress, followed by a green screen, indicating a successful load.
PhoenixPhlash Status
PRESS ANY KEY TO EXIT
Flash memory has been successfully programmed
19502
The Class/Model/Serial # information is deleted using the Crisis
Recovery procedure. Use the normal BIOS update procedures, as
discussed earlier in this chapter, to restore the information.
To Next Page
Loading...
