NCR 7454 - Page 241

Index-3
POS connector board, 1-30
Features, 1-4
Power LED, 1-17
Power OK LED, 1-31
Power supply
Description, 1-32
Power/status LED, 1-31
Printer
Installation, 2-6
Printers, 1-26
Processor board
Connector descriptions, 1-14
Description, 1-8
Features, 1-3
Processor/chip set, 1-8
—R—
Remote customer display
Installation, 2-11, 2-17
Reset switch, 1-29
Resolutions supported, 1-18
RS-232 Port, Dual, B-20
—S—
Serial mouse
Installation, 2-31
Serial number, 1-2
Serial ports, 1-12
Setup
Advanced menu, 3-8, 3-34
Boot menu options, 3-24, 3-60
Continuous POST, 3-24
Default factory settings, 3-3
Disk on chip address, 3-11, 3-44
Eentering with a keyboard, 3-2
Entering without a keyboard, 3-1
Exit menu options, 3-25, 3-61
Fixed disk, 3-23
I/O device configuration, 3-8, 3-12, 3-
37, 3-45, 3-46, 3-47, 3-48
IDE drive/PCI bus monitoring, 3-23, 3-
47, 3-59
ISA graphics device, 3-16
Large disk access, 3-15, 3-47
Local bus adapter, 3-9
Memory cache, 3-6, 3-35
MSR address, 3-12, 3-45
Parallel port, 3-10, 3-39
PCI configuration, 3-16
PCI/PNP ISA UMB region exclusion, 3-
17, 3-18
Plug and play, 3-13
Power menu options, 3-19, 3-21, 3-57
Power savings, 3-21, 3-57
PS/2 mouse, 3-14
Reset configuration data, 3-14
Secured setup configuration, 3-15
Serial port, 3-9, 3-37
System boot sequence, 3-24
Video, 3-23
Setup utility, 1-19
Speaker module, 1-32
—T—
Touch screen controller, 1-14
—U—
Universal serial bus, 1-11
USB RS-232 port server, 1-33, B-17