Chapter 2: Hardware Installation 2-33
11. Create a new string value to contain the password for the default
user. Select the
Edit menu, select New and then select String Value.
12. Name the new entry
DefaultPassword.
13. Edit the string value. With DefaultPassword selected, select the Edit
menu and then select Modify. Enter the value of the password of the
default user (from Step 1). The example below uses password.
14. Select OK to set the value.
This completes the client installation.
To bypass auto logon, and to log on as a different user, hold down the
SHIFT key after a logoff or after a Windows NT restart.
To Next Page
Loading...
