6-116 SLES 15 SP4 Software RAID Gold Master Image
10.
Select the Add RAID button. The Add RAID screen is displayed.
11. Do the following:
• From the RAIDType options, select RAID 1 (Mirroring).
• In the Raid Name field, enter a preferred name. For example, boot.
• From the Available Devices list, select the first partition of disk 1 (nvme0n1p1)
and the first partition of disk 2 (nvme1n1p1), then select Add. In the Selected
Devices list, nvme0n1p1 and nvme1n1p1 are displayed.
12.
Select Next. The Chunk Size dropdown list is displayed.
13. From the Chunk Size dropdown list, select the preferred size.
To Next Page
Loading...
Need help?
General
