1-46 Product Overview
Trusted Platform Module (TPM)
The CX5 supports fTPM(software) version 2.0. To confirm that TPMis enabled, follow
these steps:
1.
Go to Windows Device Manager.
2.
Click the drop-down for Security devices. Trusted Platform Module 2.0 should
display as shown below.
Imager
Programming the Imager
To program the imager to work on a Retail or Hospitality (Aloha)POS, refer to the
following sections in the Imager Setup Sheets document (BCC5-0000-5470):
https://onlinehelp.ncr.com/Retail/Scanners/ImagerSetup/HTML/FrontMatter-HTML/Home.htm
• Retail
• Honeywell N6600/N6700 Retail Quick Imager Setup
• Hospitality (Aloha)
• Honeywell N6600 Aloha Programming Sheet
To Next Page
Loading...
