NCR CX5 - Installing the Second Cash Drawer; Second Cash Drawer for USB Centric I;O (Retail)

2-60 Hardware Installation
Installing the Second Cash Drawer
A second Cash Drawer can be installed on terminals with a:
• USBCentric I/O Base — For more information, refer to Second Cash Drawer for
USBCentric I/O (Retail) below.
• Serial Centric I/O Base — For more information, refer to Second Cash Drawer for Serial
Centric I/O(Hospitality) on the facing page.
Second Cash Drawer for USBCentric I/O (Retail)
The USBCentric I/O supports a 2-drawer configuration with a Dual Cash Drawer Cable.
Connect this cable to the Base or transaction printer cash drawer connector.
There are two versions of the Dual Cash Drawer Cable for the USBCentric I/O:
• 1432-C516-0009 (24V)
• 1432-C517-0009 (12V)
Caution: The two cables look very similar. Make sure to use the correct one.
Connecting the wrong cable can cause system damage.