Product Overview 1-13
Mounting Configurations
In addition to the integration of the board in the base, each I/O can be configured for a
wall mount solution, pole mount solution, or ordered in a remote chassis to permit
placement under the counter.
• Table Top Stand below
• Remote I/OChassis – Pole Mount on page15
• Integrated I/OChassis – Stand/Wall/Pole Mount on page16
Table Top Stand
Table Top Stand with Remote Power Supply
The Power Supply is not integrated in the Base.
For CX5 15.6” 16:9 Display
• with USBCentric I/O (Retail) (F033)
• with Serial Centric I/O (Hospitality) (F035)
For CX5 15” 4:3 Display
• with USBCentric I/O (Retail) (F043)
• with Serial Centric I/O (Hospitality) (F045)
To Next Page
Loading...
Need help?
General
