NCR CX5 - Page 171

C-157 Flip Functionality
Flipped Upwards
To enable the flip functionality, the G-Sensor driver must be installed. The NCR OS
Image includes a pre-installed G-Sensor driver. The driver can be found in the
C:\Install\drivers\G-Sensor directory. If not using an NCROSImage, follow these
steps:
1. Download the G-Sensor driver from the NCRwebsite:
https://www5.ncr.com//support/support_drivers_
patches.asp?Class=External/GSensor\Windows\Driver
2. Right-click on Setup.exe
3.
Select Run as administrator.
4. Follow the GUI instructions to complete the installation.