Document Revision 1 Electra Elite IPK II
2 - 114 Call Forwarding, Off-Premise
11-11-46 Service Code Setup (for Setup/Entry Operation) - Set or Cancel Call Forwarding Busy
Split
Used to assign the Call Forward Busy Split Service Code (default not assigned).
11-11-47 Service Code Setup (for Setup/Entry Operation) - Set or Cancel Call Forwarding No
Answer Split
Used to assign the Call Forward No Answer Split Service Code (default not assigned).
11-11-48 Service Code Setup (for Setup/Entry Operation) - Set or Cancel Call Forwarding Busy/No
Answer Split
Used to assign the Call Forward Busy No Answer Split Service Code (default not assigned).
11-11-49 Service Code Setup (for Setup/Entry Operation) - Set or Cancel Call Forwarding Both
Ring Split
Used to assign the Call Forward Both Ring Split Service Code (default not assigned).
11-11-52 Service Code Setup (for Setup/Entry Operation) - Set or Cancel Call Forward All Call at
Destination Station [No Split]
Used to assign the Call Forward All for any Extension Service Code (default not assigned).
11-11-53 Service Code Setup (for Setup/Entry Operation) - Set or Cancel Call Forward Busy at
Destination Station [No Split]
Used to assign the Call Forward Busy for any Extension Service Code (default not assigned).
11-11-54 Service Code Setup (for Setup/Entry Operation) - Set or Cancel Call Forward No Answer
at Destination Station [No Split]
Used to assign the Call Forward No Answer for any Extension Service Code (default not
assigned).
11-11-55 Service Code Setup (for Setup/Entry Operation) - Set or Cancel Call Forward Busy/No
Answer at Destination Station [No Split]
Used to assign the Call Forward Busy No Answer for any Extension Service Code (default not
assigned).
15-07-01 Programmable Function Keys
20-06-01 Class of Service for Extensions
Assign Class of Service (1~15) to an extension.
20-11-12 Class of Service Options (Hold/Transfer Service) - Call Forwarding Off-Premise
In an extensions Class of Service, enable (1) or disable (0) setting up Call Forwarding Off-
Premise at the extension.
24-02-07 System Options for Transfer - Trunk-to-Trunk Transfer Release Warning Tone
This timer will start when a trunk begins talking with another trunk (for example: trunk-to-trunk
transfer, outgoing from trunk, Tandem Trunking) (0~64800, default: 1800).
To Next Page
Loading...
