Document Revision 1 Electra Elite IPK II
2 - 138 Call Waiting / Camp-On
Required Component(s)
None
Related Features
Callback
Dual Line Appearance/Off-Hook Signaling
Off-Hook Signaling
Programmable Function Keys
Transfer
Trunk Queuing/Camp-On
Programming
11-12-04 Service Code Setup (for Service Access) - Set Camp-On
Customize the Service Code, which is to be used for setting Camp-On (default: 750).
11-12-05 Service Code Setup (for Service Access) - Cancel Camp-On
Customize the Service Code, which is to be used for cancelling Camp-On (default: 770).
11-12-47 Service Code Setup (for Service Access) - Call Waiting Answer / Split Answer for SLT
If required, use this program to change the code users dial to Split while on a call. This code is
normally 794.
11-16-05 Single Digit Service Code Setup - Camp-On
Customize the1-digit Service Code used for setting Camp-On (default: #).
11-11-23 Second Call for DID/ DISA/ DIL/ E&M
This service code enables Second Call to each extension when PRG 20-09-01 (Second Call) is
set to 0 (disable).
679 = Default Service Code
To Next Page
Loading...
