EasyManua.ls Logo

NEC ELECTRA ELITE IPK II - Page 161

NEC ELECTRA ELITE IPK II
996 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Electra Elite IPK II Document Revision 1
Call Waiting / Camp-On 2 - 139
15-02-06 Hold Key Operation Mode
Sets the function of the extension’s Hold key.
0 = Normal Hold (default)
1 = Exclusive Hold
2 = Park Hold
15-02-12 Off-Hook Signaling Type
For each extension, set the Off-Hook Ringing type.
0 = Muted (default)
1 = None
3 = Beep in Speaker
4 = Beep in Handset
15-07-01 Programming Function Keys
Assign a function key for Camp-On (code 35). This key is also the Callback key.
20-01-08 System Options - Trunk Queuing Callback Time
Set the Trunk Queuing callback time (default: 15). A Trunk Queuing Callback will ring an
extension for this interval.
20-01-09 System Options - Callback/Trunk Queuing Cancel Time
The system cancels an extension’s Callback or Trunk Queueing request after this interval
(default: 64800 seconds).
20-03-01 System Options for Single Line Telephones
The system cancels an extension’s Callback or Trunk Queueing request after this interval
(default: 64800 seconds).
20-06-01 Class of Service for Extensions
Assign a Class of Service to an extension (1~15).
20-09-01 Second Call for DUD/ DISA/ DDI/ DIL/ E&M
Enable (1) or disable (0) an extension’s ability to receive a second call from a DID, DISA, DIL, or
Tie line caller.
20-09-07 Call Queuing
Set to Enable (1) or Disable (0).
20-13-05 Intercom Off-Hook signaling
In an extension’s Class of Service, enable (1) or disable (0) the extension’s ability to receive
Off-Hook Signaling.
20-13-06 Automatic Override (for KST) / Call Waiting (for SLT)
Enable (1) or disable (0) an extension’s ability to receive a second call from intercom caller.

Table of Contents

Other manuals for NEC ELECTRA ELITE IPK II

Related product manuals