NEC ELECTRA ELITE IPK II - Page 176

Document Revision 1 Electra Elite IPK II
2 - 154 Caller ID
3. Press the CID Softkey (Caller ID). The display shows:
## = List Number
xx = Caller ID number
mm-dd hh:mm = incoming date and time
↑ = Preview List
↓ = Next List
Store = Store in List
DEL = Delete from List
4. Press the STORE Softkey. The display shows:
## = List Number
xx = Caller ID number
mm-dd hh:mm = incoming date and time
STA = Store in Station Speed Dial bin.
SYS - Store in System Speed Dial bin.
5. Press the STA or SYS Softkey. The display shows:
6. Dial the Abbreviated Dial bin in which the number is to be stored. If you press Hold, the next
available Abbreviated Dial bin will be used. The display shows:
 If all Abbreviated Dial bins are used, the display shows “TABLE IS FULL”.
7. Press HOLD. The display shows:
##: xxxxxxxxxxxxx
mm-dd hh:mm
↑ ↓ Store DEL
##: xxxxxxxxxxxxx
mm-dd hh:mm
STA SYS
Store to SYS: COMMON
ENTER BIN
SYS XXXX:
xxxxxxxxxxxxx
SYS XXXX
-