NEC ELECTRA ELITE IPK II - Page 178

Document Revision 1 Electra Elite IPK II
2 - 156 Caller ID
2. Press the LIST Softkey. The display shows:
3. Press the CID Softkey (Caller ID). The display shows:
## = List Number
xx = Caller ID number
mm-dd hh:mm = incoming date and time
↑ = Preview List
↓ = Next List
Store = Store in List
DEL = Delete from List
4. Press the STORE Softkey. The display shows:
## = List Number
xx = Caller ID number
mm-dd hh:mm = incoming date and time
STA = Store in Station Speed Dial bin.
SYS = Store in System Speed Dial bin.
5. Press the STA Softkey. The display shows:
6. Press the One-Touch key in which the number is to be stored or dial 1~9, 0. If you press Hold, the
next available One-Touch key will be used. The display shows:
 If all One-Touch keys are used, the display shows “TABLE IS FULL”.
7. Press Hold. The display shows:
LIST DIR ICM PROG
LISTlMENU
Redial CID
##: xxxxxxxxxxxxx
mm-dd hh:mm
↑ ↓ Store DEL
##: xxxxxxxxxxxxx
mm-dd hh:mm
STA SYS
Store to ONE-TOUCH
ENTER BIN
Key ##:
xxxxxxxxxxxxx
KEY ##
-