Electra Elite IPK II Document Revision 1
Caller ID 2 - 157
8. Enter the name to be associated with the stored number. Refer to Table 2-1 Keys for Entering
Names on page 2-155.
9. Press Hold. The display shows:
10. Press Speaker.
The telephone returns to an idle condition.
Temporary Memory
An unanswered call will cause the Call History key (PGM 15-07 or SC 751: 08) to flash, indicating a new
call has been placed in the temporary memory. If enabled in programming, the telephone’s display will
show “CHECK LIST”.
1. Press the Call History key (PGM 15-07 or SC 751: 08) or press the LIST Softkey and CID.
The last addition to the list is displayed.
2. Press the ARROW DOWN Softkey to scroll through the list of numbers in memory.
3. Press the DEL Softkey to delete the entry and scroll to the next entry.
4. The Call History key will remain on as long as entries remain in memory.
5. To place a call back to a number in the temporary memory list, with the number to be dialed
displayed, press a line or Speaker key. (Refer to Table 2-1 Keys for Entering Names on page
2-155.)
The outgoing call is placed.
To display Caller ID for a call in Park:
With Program 15-02-08 set to “0” (pre-select) for this feature.
1. With Program 15-02-08 set to “0” (pre-select) : With a call in park, press the PARK key. (PGM
15-07 or SC 752:
∗04).
- OR -
With Program 15-02-08 set to “1” (One-Touch): With a call in park, press RECALL then the PARK
key (PGM 15-07 or SC 752
∗04).
KEY PROG ONE TOUCH
To Next Page
Loading...
