Document Revision 1 Electra Elite IPK II
2 - 228 Conference
15-07-01 Programming Function Keys
Assign a function key for Conference (code 07) and Barge in Code (34).
20-06-01 Class of Service for Extensions
Assign a Class Of Service (1~15) to an extension.
20-11-21 Class of Service Options (Hold/Transfer Service) - Restriction for Tandem Trunking on
Hang Up
Allow (0) or deny (1) an extension user’s ability to set up a tandem call automatically when they
hang up. By default, this option is allowed (0).
20-13-08 Class of Service Options (Supplementary Service) - Conference
In an extension’s COS, enable (1) or disable (0) the extension’s ability to initiate a Conference.
20-13-10 Barge In Mode per COS
20-13-15 Class of Service Options (Supplementary Service) - Barge-In Initiate
In an extension’s COS, enable (1) or disable (0) the extension’s ability to Barge-In to a call.
20-13-16 Class of Service Options (Supplementary Service) - Barge-In Receive
In an extension’s COS, enable (1) or disable (0) the extension’s ability to receive a Barge-In on a
call.
20-14-11 Class of Service Options For DISA/E&M - DISA/Tie Trunk Barge-In
Determine if DISA and tie trunk users should have the ability to dial a service code to Barge-In to
a Conference call (0 = Disabled, 1 = Enabled).
Operation
To establish a Conference:
Multiline Terminal
1. Establish intercom or trunk call.
2. Press the Conf key or Conf softkey (PGM 15-07 or SC 751: 07).
3. Dial the extension you want to add.
- OR -
Access outside call
- OR -
Retrieve call from Park orbit.
To get the outside call, you can either press a line key or press the Speaker key and dial 9, the Trunk Access Code
+ the trunk number (default #9). You can optionally go back to step 2 to add more parties to your Conference.
4. When called party answers, press the Conf softkey or the Conf key twice.
To Next Page
Loading...
