Document Revision 1 Electra Elite IPK II
2 - 12 Account Code Entry
If the system has Account Codes disabled, the digits dialed (e.g.,
,
1234
,
) appear on the
SMDR report as part of the number dialed.
Do not use an asterisk within a PBX access code when using Account Codes. Otherwise,
after the
,
, the trunk will stop sending digits to the central office.
Account Codes appear on the SMDR report (even if they are hidden on the telephone’s
display).
To simplify Account Code entry, store the Account Code (e.g., 1234) in a One-Touch Key.
Just press the key instead of dialing the codes.
Abbreviated Dialing bins can contain stored Account Codes. Prevent them from being
displayed using 20-07-04.
Automatic Route Selection (ARS) can force a user to enter an Authorization Code prior to
using a certain route. The system verifies the ARS Authorization Code dialed against the
ARS Authorization Code list (Program 44-03).
Default Settings
Disabled
System Availability
Terminals
All Terminals
Required Component(s)
None
To Next Page
Loading...
