NEC ELECTRA ELITE IPK II - Page 553

Electra Elite IPK II Document Revision 1
ISDN Compatibility 2 - 531
B
Do you want
unanswered PRI
calls to reroute if
unanswered?
In 22-01-04,
enter 0.
In 22-01-04,
enter 0.
Reroute
Do not
reroute
In 22-08-01, enter
the no-answer
Ring Group for
unanswered PRI
calls.
In 22-04-01, assign
extension
to PRI trunk's Ring No
Answer Ring Group.
For each extension in the
Ring Group, in 22-06-01,
enter '1' for each time mode
when the extension should
ring.
If a PRI call rings longer than
a specified interval, should
the ring cadence change to a
unique "alarm" sound?
In 22-01-02, enter
0.
In 22-01-02, Enter 1.
Also, set the interval
in 22-01-03.
YesNo
Do you want to
change the way
PRI calls ring
telephones?
Change the Ring Tone
Range in 22-03-01 and
15-02-02 the tones within
each range in 82-01-01
and the ring cadence in
20-15-01.
Yes
For ringing extensions,
should extension ring
when line key starts
flashing or wait for the
system ring cycle?
In 10-08-01, enter
1 to enable pre-
ringing for trunk
calls.
In 10-08-01, enter
0 to disable pre-
ringing for trunk
calls.
Wait for
ring Cycle
When Line
Key Flashes
No
Do you want line
keys or CAP Keys
for incoming PRI
trunks?
Consider using CAP Keys,
Multiple Directory Numbers, or
Ring Groups for PRI trunks
instead of Direct Trunk
Appearance. .
In 15-07-01, program
function keys as line keys
(*01), loop keys (*05) or
line group keys (*02).
Yes
Do you want to
adjust the gain
(volume) for trunks?
Adjust the CODEC
Gain in 14-01-02
(transmit) and 14-
01-03 (receive).
Trunks
No
Finished
No