NEC ELECTRA ELITE IPK II - Page 806

Document Revision 1 Electra Elite IPK II
2 - 784 Station Message Detail Recording
In 35-01-03, enter 0.
‘A’
In 35-04-01, for each Department group, select SMDR port (1~8) to
which the outgoing SMDR information should be sent.
For example, you can use the feature
to block the printing of security codes.
What language should be
used for the SMDR header?
English
Spanish
In 35-01-03, enter 4.
In 35-01-03, enter 1.
German
In 35-01-03, enter 3.
Italian
In 35-01-03, enter 2.
Do you want
American, European
or Japanese date
format in SMDR
header?
In 80-05-01, enter 0.
American
European
In 80-05-01, enter 1.
Japanese
In 80-05-01, enter 2.
In 35-01-04, enter the number of
digits you want to block. If you
enter 8 for example, SMDR Xs
out the last 8 digits dialed.
Do you want to
block (i.e., ‘X’ out)
any of the digits on
the SMDR Report?
In 35-01-04, enter 0.
To only have long distance calls
print, for example, enter 8.
In 35-01-05, enter the minimum
number of digits a user must
dial (1~24) before the system
includes the call on the SMDR
report.
In 35-01-05, enter 0.
Yes
No
Should all outgoing
calls print on the
SMDR report,
regardless of the
number of digits
dialed?
No
Yes
Continued
on next
page.
In 35-03-01, for each trunk group, select the SMDR port (1~8)
to which the incoming SMDR information should be sent.