155
❶ Mounting a lens (sold separately)
Sixseparatebayonetstylelensescanbeusedwiththisprojector.ThedescriptionsherearefortheNP13ZL(2xzoom)
lens.Mountotherlensesinthesamemanner.
NOTE:
• Theprojectorandlensesaremadeofprecisionparts.Donotsubjectthemtoshockorexcessiveforces.
• Removetheseparatelysoldlenswhenmovingtheprojector.Ifnot,thelenscouldbesubjecttoshockwhiletheprojectorisbeing
moved,damagingthelensandthelensshiftmechanism.
• Turnoffthepowerandwaitforthecoolingfantostopbeforemountingorremovingthelens.
• Nevertouchthelenssurfacewhiletheprojectorisoperating.
• Beverycarefulnottoletdirt,grease,etc.,onthelenssurfaceandnottoscratchthelenssurface.
• Performtheseoperationsonaatsurfaceoverapieceofcloth,etc.,topreventthelensfromgettingscratched.
• Whenleavingthelensofftheprojectorforlongperiodsoftime,mountthedustcapontheprojectortopreventdustordirtfrom
getting inside.
• Ifyouhavemultipleprojectors,becarefulofthefollowing:
- WhenmountingalensdesignedexclusivelyforthisprojectorontoanotherprojectorintheNPseries,besuretoremovethe
lens attachment before mounting the lens on the projector. The lens cannot be mounted if its attachment is on. For the types
oflensesthatcanbemountedandinstructionsonremovingthem,seethelense’soperatinginstructions.
- Othertypesoflensescannotbemountedonthisprojector.
Mounting the lens
1. Remove the dust cap from the projector.
2. Remove the lens cap on the back of the lens.
3. Insert the lens onto the projector with the yellow-marked
protrusion on the lens facing upwards.
Thereisapositioningslitontheprojector’slensinsertionslot.
Insertthelensslowlyallthewayin,keepingthepositioningslit
atthesameangle.
Guidingnotch
Yellowmark
6. Connecting to Other Equipment