To Next Page

To Previous Page

4. Multi-Screen Projection

Projecting two screens

1. PresstheMENU buttonto displaythe on-screenmenuand select[DISPLAY]→[PIP/PICTURE BYPIC-

TURE].

 Thisdisplaysthe[PIP/PICTUREBYPICTURE]screenintheon-screenmenu.

2. Select[SUBINPUT]usingthe▼/▲ buttons, and press the ENTER button.

 Thisdisplaysthe[SUBINPUT]screen.

3. Select the input signal using the ▼/▲ buttons, and press the ENTER button.

* ThisscreenbelongstoaHDBaseTmodel.

 The[PIP](PICTUREINPICTURE)or[PICTUREBYPICTURE]screensetupunder[MODE]isprojected.(→page

100)

• Whenthesignalnameisdisplayedingrey,thismeansthatitcannotbeselected.

• ThesignalcanalsobeselectedbypressingthePIPbuttonorPBP/POPbuttonontheremotecontrol.

4. Press the MENU button.

 Theon-screenmenuwilldisappear.

5. Whenreturningtosinglescreen,displaythe[PIP/PICTUREBYPICTUE]screenonemoretimeandselect

[OFF]inthe[SUBINPUT]screenoftheStep3.

TIP:

• Duringdual-screenprojection,iftheselectedinputisnotsupportedbythesub-screen,thesub-screenwillappearasablack

screen.

Brand

Model

PA721X

NEC PA721X User Manual

Other manuals for NEC PA721X