NEC SL1000 - Page 103

Guide to Feature Programming
Program Num-
ber
Program Name Default
11-11-23 Service Code Setup (for Setup/Entry Operation) - Second Call
for DID/DISA/DIL
779
11-12-04 Service Code Setup (for Service Access) - Set Camp-On 850
11-12-05 Service Code Setup (for Service Access) - Cancel Camp-On 870
11-12-47 Service Code Setup (for Service Access) - Call Waiting An-
swer/Split Answer
894
11-16-05 Single Digit Service Code Setup - Camp-On #
15-02-06 Multiline Telephone Basic Data Setup - Hold Key Operating
Mode
0
15-02-12 Multiline Telephone Basic Data Setup - Off-Hook Ringing 0
15-07-01 Programmable Function Keys Refer to Programming Manual.
20-01-08 System Options - Trunk Queuing Callback Time 15 (seconds)
20-01-09 System Options - Callback/Trunk Queuing Cancel Time 64800 (seconds)
20-03-01 System Options for Single Line Telephones - SLT Call Waiting
for Answer Mode
0
20-06-01 Class of Service for Extensions All extension port = Class 1
20-09-01 Class of Service Options (Incoming Call Service) - Second Call
for DID/DISA/DDI/DIL Override
COS 01 ~ 15 = 0
20-09-07 Class of Service Options (Incoming Call Service) - Call Queu-
ing
COS 01 ~ 15 = 0
20-13-05 Class of Service Options (Supplementary Service) - Intercom
Off-Hook signaling
COS 01 ~ 15 = 1
20-13-06 Class of Service Options (Supplementary Service) - Automatic
Off-Hook Signaling (Automatic Override)
COS 01 ~ 15 = 0
20-13-35 Class of Service Options (Supplementary Service) - Block
Camp-On
COS 01 ~ 15 = 0
20-18-06 Service Tone Timers - Interval of Call Waiting Tone 10 (seconds)
Operation
To Camp-On a busy extension:
1. Call the busy extension.
2. Dial 850 or press the Camp-On key (PRG 15-07 or SC 851: 35).
3. Do not hang up.
To camp-on to a trunk, refer to Trunk Queuing/Camp-On on page 1-704.
To cancel a Camp-On request:
1. Hang up.
2. At a Multiline Terminal, press Speaker key and dial 870.
- OR -
At a Multiline Terminal, press the Camp-On key (PRG 15-07 or SC 851: 35).
- OR -
At the Single Line Terminal, lift the handset and dial 870.
ISSUE 2.0
SL1000/SL1100
Features and Specifications Manual 1-93
C