Department Step Calling
Description
After calling a busy Department Calling Group member, an extension user can have Department Step
Calling quickly call another member in the group. The caller does not have to hang up and place
another Intercom call if the first extension called is unavailable. Department Step Calling also allows
an extension user to cycle through the members of a Department Group.
Conditions
• If required, use this option to change the Department Step Calling Single Digit Service Code (default
code = 2).
• A function key for Department Step Calling can be assigned (code 36).
• In PRG 20-08-12, enable (1) or disable (0) an extension ability to use Department Step Calling.
• When using department group step calling and ecology mode there must be at least two terminals
functioning for the step call feature to work.
Default Settings
Enabled
System Availability
Terminals
All Stations
Required Component(s)
None
Related Features
Department Calling
Programmable Function Keys
Guide to Feature Programming
Program Num-
ber
Program Name Default
11-12-07 Service Code Setup (for Service Access) - Step Call 808
11-16-01 Single Digit Service Code Setup - Step Call 4
15-07-01 Programmable Function Keys Refer to Programming Manual.
ISSUE 2.0 SL1000/SL1100
Features and Specifications Manual 1-183
D
To Next Page
Loading...
