NEC SL1000 - Operator

Operator
Description
When an extension user dials 0, calls are routed to a main system operator. The operator can answer
and route outside calls or locate employees using the Page feature.
A maximum of eight operators is available.
Conditions
• Attendant extensions can have up to 32 incoming calls queued before additional callers hear busy
tone.
• The operator extension cannot be a virtual extension.
• Extensions and trunks can be assigned to an operator group. A call to an operator that is busy rolls
to the next operator in the operator group.
Default Settings
No operators are assigned.
System Availability
Terminals
All Stations
Required Component(s)
None
Related Features
Attendant Call Queuing
Guide to Feature Programming
Program Num-
ber
Program Name Default
20-01-01 System Options - Operator Access Mode 0
20-17-01 Operator Extension - Operator’s Extension Number 200
20-17-02 Operator Console 0
20-35-01 Extension’s Operator Setting 0
20-36-01 Trunk’s Operator Setting 0
20-37-01 Operator Extension Group Setup not assigned
ISSUE 2.0 SL1000/SL1100
Features and Specifications Manual 1-535
O