Flexible Ring
(This Feature is for V1.5 or higher)
Description
Previously ring tones for incoming trunk calls are assigned to same tone at the extension. From V1.5
extensions have ability to assign individual ring tones for each trunk call. Beside system programming
ring tones can be assigned by accessing service code or Soft Key if available. Also each night mode
can be configurable to be confirmed by individual ring tones.
Ring tone can be assigned by accessing service code or Soft Key operation.
The data set manually is saved in Program 15-28-01.
Service Code
861 + Trunk number xxx + Night Mode 1 ~ 8
Soft Key
(This Feature is available for SL1000 who is using IP4WW-24TIXH-C-TEL) (SL1000)
Intercom ring tone can be set by Menu Soft Key + Dial 41.
Line keys ring tone can be set by Menu Soft Key + Dial 42.
Each line key and each night mode can be set by Menu Soft Key + Dial 43.
This night mode follows night mode group (Program 12-05) of the terminal.
Soft Key Menu Index 1 Index 2 Input Data
Ring Preferences Intercom (Menu 41) - - Ring Type = 1 ~ 8
Ring Preferences Line Keys (Menu 42) - - Ring Type = 1 ~ 8
Ring Preferences Each Line Keys
(Menu 43)
Line Key (001 - Trunk Max) Night Mode (1 ~ 8) Ring Type = 1 ~ 8
Conditions
• When the ring tone is changed at the terminal, the changed data is saved to Program 15-28-01.
When Program 15-28-01 is to "0", ring tone follows the setting of Program 15-02-02.
• During incoming call Soft Key can not be used to set ring tone.
• Delay ring follows the setting of DIL/IRG No Answer Destination (Program 22-08).
• This feature does not work for Recall, Transfer call, Virtual extension ring or ring no answer alarm
for Incoming call.
Default Settings
All trunks are in Ring Group 1. Extensions 200 ring for trunk calls and all other extensions only flash.
SL1000/SL1100
ISSUE 2.0
1-246
Flexible Ring
F
To Next Page
Loading...
