NEC SL1000 - Figure 1-33 Webpro End User Screen

Figure 1-33 WebPro End User Screen
Conditions
• When connecting via a dial up connection, a Dial Up Connection (PPP) must be configured in
Windows Network Connections.
• When uploading via a Dial Up connection, uploading card configuration (Hardware Upload) is not
supported.
• The hardware/software requirements to run PCPro :
Item Requirement
CPU Pentium® III 598 MHz (minimum)
Pentium 4 2.5 GHz (recommended)
Memory 128 MB of RAM, 256 MB (recommended)
Operating System (OS) Windows XP or Microsoft Vista
Windows 7 (32– and 64–bit)
Other Microsoft Internet Explorer 6.0 or higher
Communication Port LAN or Modem
Disk Space 35 MB for PCPro (minimum)
TCP Port TCP port 8000 must be open between the terminal and the host PC for
uploading/ downloading via LAN. PCPro/WebPro TCP port is set for
8000 at default, but can be changed via WebPro using PRG 90-38-02.
PRG 90-38-02 is not accessible from Telephone Programming or PCPro.
TCP port 5963 is required to be open if the Debug Terminal is going to
be used.
Screen Resolution 800 x 600 (minimum)
1024 x 760 (recommended)
SL1000/SL1100 ISSUE 2.0
1-558
PC Programming
P