NEC SL1000 - Programmable Function Keys

Programmable Function Keys
Description
Each Multiline Terminal has Programmable Function Keys. Programmable Function Keys simplify
placing calls, answering calls and using certain features. You can customize the function of a Multiline
Terminal programmable keys from each Multiline Terminal. Depending on your telephone style, you
can have up to 24 Programmable Function keys.
Conditions
• When a key is programmed using service code 852, that key cannot be programmed with a function
using the 851 code until the key is undefined (000). For example with a Park Key programmed by
dialing 852 +
*
04 must be undefined by dialing 000 before it can be programmed as a Voice Over
key by dialing 851 + 48.
• Using PRG 92-01 to copy a Multiline Terminal Programmable Function Keys, copies all the keys
whether or not they exist on the telephone to which the programming is being copied. This may
cause confusion when trying to define a key which is already defined but which does not exist on
the telephone (displays as DUPLICATE DATA). It is recommended to either clear these non-existent
keys or to copy only from an extension which has the same or fewer number of keys than the
extension to which the programming is being copied.
• Speed Dialing and One-Touch Calling also offer quick access to calls and features.
• Programming a 60-button console requires separate programming.
• Below shows example of function key and LCD display indication (PRG 15-07-01 Function Key
Assignment).
FunctionNu
mber
Function Display
00 None [All Blank]
01 DSS/One-Touch DSS (SL1000)
DSS/ONE TOUCH (SL1100)
02 Microphone Key (ON/OFF) MIC KEY
03 DND Key DND KEY
04 BGM (ON/OFF) BGM
05 Headset HEADSET
07 Conference Key CONFERENCE
10 Call Forward - Immediate FORWARD (SL1000)
CALL FORWARD (SL1100)
11 Call Forward - Busy TRANSFER-BUSY
12 Call Forward - No Answer TRANSFER-NO ANS
13 Call Forward - Busy/No Answer TRANSFER-B/N (SL1000)
TRANSFER-BUSY/NO ANS (SL1100)
14 Call Forward - Both Ring FWD-DUAL RING (SL1000)
CALL FWD-DUAL RING (SL1100)
15 Follow Me FOLLOW ME
If a key is programmed as a DSS/One-Touch key for a station that is set for Call Forward All Calls or
Do Not Disturb, the DSS/One-Touch key flashes.
Refer to the SL1000/SL1100 Programming Manual for a complete list of Function Numbers.
• One-Touch keys programmed for Park Hold Service Code cannot be used to park calls without
using Hold or Transfer.
ISSUE 2.0
SL1000/SL1100
Features and Specifications Manual 1-571
P