NEC SL1000 - Table 1-16 LED Flash Patterns

2. Dial the Dial-In Mode Switching Service Code (Default = Not assigned).
- OR -
Press the Dial-In Mode Switching Programmable Function key (PRG 15-07-01, 88, or SC 851
Key Code 88).
3. Dial 1 ~ 500 (V2.0 or higher) 100 (V1.5 or lower) (table number).
4. Dial the Time Pattern 1~8.
Table 1-16 LED Flash Patterns
Time Pattern LED Appearance
Pattern 1 Off
Pattern 2 On
Pattern 3 Slow Flash
Pattern 4 Fast Flash
Patterns 5~8 Off
SL1000/SL1100 ISSUE 2.0
1-206
Direct Inward Dialing (DID)
D