NEC SL1000 - Flash

Flash
Description
Flash allows an extension user to access certain CO and PBX features by interrupting the trunk loop
current. Flash lets an extension user take full advantage of whatever features the connected Telco or
PBX offers. You must set the Flash parameters for compatibility with the connected Telco or PBX.
Conditions
The system does not provide a ground flash.
Default Settings
Enabled
System Availability
Terminals
All Stations
Required Component(s)
None
Related Features
PBX Compatibility/Behind PBX
InMail
Guide to Feature Programming
Program Num-
ber
Program Name Default
11-12-42 Service Code Setup (for Service Access) - Flash on
Trunk Lines
#3
14-02-03 Analog Trunk Data Setup - Flash Type 0
14-02-04 Analog Trunk Data Setup - Hooking Type 1
14-04-01 Behind PBX Setup 0
15-03-04 Single Line Telephone Basic Data Setup - Flashing 1
81-10-07 COI Initial Data Setup - Hookflash Time Selection 1 9 (600 ms)
81-10-08 COI Initial Data Setup - Hookflash Time Selection 2 14 (3.0 seconds)
SL1000/SL1100 ISSUE 2.0
1-244
Flash
F