Handset Mute/Handset Cutoff
Description
At the same time with Microphone On/Off control, Handset Mute/Handset Cutoff is provided to
Multiline Terminals connected to the SL1000/SL1100 system. While talking on the Multiline Terminal
handset, a station user can press Mute key to mute the transmit speech path. The station user can
still hear the outside (or intercom) voice.
Conditions
• Mute key flashes when active.
• When Mute is set at the terminal and answer the incoming call or held call by Off Hooking the
Handset, transmit Mute is canceled temporary, and back to original Mute state when On Hook.
• At PRG 15-02-50, MIC Lamp Status Change, Mute key LED can be set either way. Default is LED
On when Mute On.
Default Settings
None
System Availability
Terminals
All Multiline Terminals
Required Component(s)
None
Related Features
Programmable Function Keys
Guide to Feature Programming
Program Num-
ber
Program Name Default
15-02-50 MIC Lamp Status Change 0
15-07-01 Programmable Function Keys Refer to Programming Manual.
SL1000/SL1100 ISSUE 2.0
1-270
Handset Mute/Handset Cutoff
H
To Next Page
Loading...
