Dial Tone Detection
Description
If a trunk has Dial Tone Detection enabled, the system monitors for dial tone from the Telco or PBX
when a user places a call on that trunk. If the user accesses the trunk directly (by pressing a line key
or dialing #0 and the trunk number), the system drops the trunk if dial tone does not occur. If the user
accesses the trunk via a Trunk Group (by dialing a trunk group code or automatically using a feature
like Last Number Redial), the system can drop the trunk or optionally skip to the next trunk in the
group. Refer to the chart under Programming for more information.
Conditions
None
Default Settings
Disabled for manually dialed calls; enabled for automatically dialed calls.
System Availability
Terminals
All Stations
Required Component(s)
None
Related Features
Abbreviated Dialing/Speed Dial
Automatic Route Selection (ARS/F-Route)
Central Office Calls, Placing
Last Number Redial
Save Number Dialed
Trunk Group Routing
Trunk Groups
ISSUE 2.0
SL1000/SL1100
Features and Specifications Manual 1-189
D
To Next Page
Loading...
