NEC SL1000 - Table 2-5 Function Key Codes by Number

To program a key, press Speaker key, dial 851 (for 3-digit code) or 852 (for 2-digit codes), press the key
and enter the code (e.g., 48 for Voice Over).
For this
feature...
Use this key... When you ... Key Lamp Status Also See Srvc
Code
Note
Step Call Code: 36
Operation: Press key
Step through a de-
partment group.
None 4
Transfer Code: 06
Operation: Establish call
+ Hold + Ext + Press key
Transfer a call. None -
Trunk
Group
Routing
Code:
*
05
Operation: Press key
Access a trunk using
Trunk Group Routing.
On red when active 9
Trunk
Groups
Code:
*
02 + TRK group
(1~9 or 001~126 (SL1000)
001~096 (SL1100) )
Operation: Press key
Use a trunk group key
to access a Trunk
Group.
On red when active 804
Trunk
Queuing
Code: 35
Operation: Hear busy
tone for Trk + Press key
Camp On or Queue
for a trunk.
On red while camped
on
-
Voice Mail Code: 83 + code (0~4)
Operation: Press key
Use Voice Mail Serv-
ice.
Flashes slowly when
monitoring
-
Code: 77 + extension or
Message Center number
Operation: Press key
+ pswd
(0000) + place outside call
Call Voice Mail or
leave a message.
Flashes green on
your key for your
messages or flashes
red for the Message
Center
*
8
5
Code: 78 + 0
Operation: Set up call +
Press key
Use Voice Mail Re-
cord.
Slow Flash red when
active
-
Voice Over Code: 48
Operation: Hear Off-Hook
Signaling tone + Press key
Initiate or respond to
Voice Over.
On red when re-
sponding Hold Flash
red when listening
6 (SL1100)
Function Key Codes by Number
Table 2-5 Function Key Codes by Number
To program a key, press Speaker key, dial 851 (for 2-digit codes) or 852 (for 3-digit codes), press the key
and enter the code (e.g., 48 for Voice Over).
Use this key... For this feature... When you ... Key Lamp Status Also see Srvc
Code
Note
Code: 01 + dest.
ext. or outside tel
# + Hold
Operation: Press
key
Direct Station Selec-
tion, Hotline, One-
Touch Calling
Call an extension or
outside number us-
ing a DSS key.
Off = extension idle
On = extension busy
Flashing = DND
847
Code: 02
Operation: Set up
call + Press key
Microphone Cutoff Use Microphone
Cutoff.
On red when activated -
Code: 03
Operation: Press
key
Do Not Disturb Activate DND. On red when activated -
Code: 04
Operation: Press
key
Background Music Turn BGM on or off. On red when activated 825
Code: 05
Operation: Press
key
Headset Operation Enable or disable
Headset Operation.
On red when activated -
SL1000/SL1100 ISSUE 2.0
2-18
Codes Tables