Illuminated Dial Pad
(This Feature is available for SL1000 who is using IP4WW-24TIXH-C-TEL) (SL1000)
Description
Illuminated Dial Pad let the IP4WW-24TIXH-C-TEL (SL1000) IP4WW-[ ]TXH-B-TEL and
IP4WW-24TIXH-C-TEL (SL1100) to illuminate their Dial Pad. Dial Pad can be illuminated in two ways.
• When the phone received call or made called.
• When the phone are set to illuminated automatically.
Exit Help
Flash
Clear/Back
ABC
GHI JKL MNO
PQRS TUV WXYZ
DEF
Hold
Speaker
1
23
4
56
7
89
0
㧏
Mute
DND
Transfer
Light Sensor
Figure 1-19 Light Sensor
Conditions
• In PRG 15-02-66 user can adjust the brightness of Dial Pad to 8 different levels.
• In PRG 15-02-46 user can set interval for the backlight to be on.
• In PRG 15-02-61 user can set Max brightness.
• In PRG 15-02-62 user can set Min brightness.
• In IP4WW-24TIXH-C-TEL, IP4WW-24TXH-B-TEL (SL1100), IP4WW-12TXH-B-TEL (SL1100) it is
equipped with Light Sensor. This sensor can set brightness up to 13 levels. If the sensor detects the
light it can turn on/off the illumination automatically. At PRG 15-02-65 if it the brightness is below the
number it will illuminate the terminal and if it is above the setting it will turn off the illumination. If
PRG 15-02-65 is set to 0 it will work by the setting done at PRG 15-02-64. In this case PRG
15-02-61 will control the brightness when to turn on and PRG 15-02-64 will control the brightness
when to turn off.
• PRG 15-02-64 will be set automatically when the System started.
It will set the setting each time system is started. If you move the phone after System is started it may not
work properly.
• If you are operating illumination automatically (PRG 15-02-63: 1) it will not illuminated when you
receive call or touching the Dial Pad like you do when automatically setting is OFF.
• After time set at PRG 15-02-46 LCD will fade but Dial Pad will not fade but will turn off immediately.
ISSUE 2.0
SL1000/SL1100
Features and Specifications Manual 1-331
I
To Next Page
Loading...
