NEC SL1000 - Figure 1-3 Walking Code Restriction

Should the Walking Toll
Restriction service code
be changed from the
default setting of 763?
In PRG 11-11-36, change
the service code to
the desired entry.
In PRG 21-14-01, assign a
table with the 6-digirt user ID dialed
to override the Toll Restriction.
Use PRG 21-01-07 to determine
how long the system should remove
Toll Restriction from the extension.
In PRG 21-14-02, for each table, assign
the Toll Restriction Class of Service
to be used when a user dials the
6-digit ID assigned in PRG 21-14-01.
(This entry should provide greater
access than the level defined in
PRG 21-04-01.)
The Toll Restriction Class of
Service used is the same as those
used by PRG 21-04-01. Refer
to the Toll Restriction feature
for defining these classes.
Start
Stop
No
Yes
Figure 1-3 Walking Code Restriction
SL1000/SL1100
ISSUE 2.0
1-150
Code Restriction Override/Toll Restriction Override
C