System Availability
Terminals
Multiline Terminal
Softphone
Required Component(s)
None
Related Features
Ring Group
Distinctive Ring
Night Service
Softkeys
Guide to Feature Programming
Program Number Program Name Default
11-11-73 Service Code Setup (for Setup/Entry Operation - Se-
lect Incoming Ring Tones at trunk
Assign Service code which changes the incoming ring
tone at trunk.
861
15-28-01 Trunk Incoming Ring Tone of Extension Setup -
Trunk incoming ring tone
Assign individual ring tones at extension for each trunk
and each Night mode.
When 0 (Trunk incoming ring tone) is selected, it follows
the setting of Program 15-02-02.
When 2 (Incoming external ring tone) is selected, it fol-
lows the setting of Program 22-03. (SL1000)
0
Operation
To set ring tone of each line by service code:
1. Press SPK + service code 861 .
2. Dial Trunk number, 001 ~ 126 (SL1000) 01 ~ 96 (SL1100) .
3. Dial Night Mode number, 1 ~ 8.
4. Dial incoming ring tone number, 0 ~ 7 (SL1000) 0 ~ 8 (SL1100). Then set ring tone is heard.
5. Press SPK.
To move to next trunk setting, dial 8, 9,
, or #, (SL1000) 9,
, or # (SL1100).
ISSUE 2.0 SL1000/SL1100
Features and Specifications Manual 1-247
F
To Next Page
Loading...
