NEC SL1000 - Page 114

Program
Number
Program Name Default
20-06-01 Class of Service for Extensions All extension port = Class 1
20-08-15 Class of Service Options (Outgoing Call Service) - Block Out-
going Caller ID
COS 01 ~ 15 = 0
20-09-02 Class of Service Options (Incoming Call Service) - Caller ID
Display
COS 01 ~ 15 = 1
20-09-04 Class of Service Options (Incoming Call Service) - Notifica-
tion for Incoming Call List Existence
COS 01 ~ 15 = 1
20-13-06 Class of Service Options (Supplementary Service) - Automat-
ic Off-Hook Signaling (Automatic Override)
COS 01 ~ 15 = 0
20-19-01 System Options for Caller ID - Caller ID Displaying Format (If
displaying digits are more than 12 digits)
0
20-19-05 System ID Options for Caller ID - Caller ID Sender Queuing
Time (Sender Wait)
0 (seconds)
20-20-01 Message Setup for Non-Caller ID Data - Private Call UNAVAILABLE INFO
20-20-02 Message Setup for Non-Caller ID Data - Call from Out of Serv-
ice Area
OUT-OF-STATE
20-20-03 Message Setup for Non-Caller ID Data - Call Information with
Error
NO CALLER INFO
90-03-01 Save Data Dial 1 + press Hold key
(Press Hold key to cancel.)
90-04-01 Load Data Dial 1 + press Hold key
(Press Hold key to cancel.)
Operation
Storing a Number (When set 15-02-60:0)
To store a Caller ID number in a Speed Dial bin: (SL1000)
PRG 15-02-60: 0: Standard
1. With a Multiline Terminal in an idle condition the display shows:
WED 22 1:59PM
201
2. Press the Left Cursor key twice. The display shows:
mm-dd hh:mm
##: xxxx
## = List Number
xxxx = Caller ID name
mm-dd hh:mm = incoming date and time
SL1000/SL1100
ISSUE 2.0
1-104
Caller ID
C