NEC SL1000 - Page 117

3. Press the CID softkey (Caller ID). The display shows:
##: xxxxxxxxxxxxx
mm-dd hh:mm
Store DEL
## = List Number
xx = Caller ID number
mm-dd hh:mm = incoming date and time
= Preview List
= Next List
Store = Store in List
DEL = Delete from List
4. Press the STORE softkey. The display shows:
##: xxxxxxxxxxxxx
mm-dd hh:mm
STA Abb
## = List Number
xx = Caller ID number
mm-dd hh:mm = incoming date and time
STA = Store in Station Speed Dial bin.
ABB - Store in System Speed Dial bin.
5. Press the STA or ABB softkey. The display shows:
Store to ABB: COMMON
ENTER BIN
6. Dial the Speed Dial bin in which the number is to be stored. If you press Hold key, the next
available Speed Dial bin will be used. The display shows:
ABB XXXX:
xxxxxxxxxxxxx
If all Speed Dial bins are used, the display shows “TABLE IS FULL”.
7. Press Hold key. The display shows:
ABB XXXX
-
ISSUE 2.0 SL1000/SL1100
Features and Specifications Manual 1-107
C