NEC SL1000 - Page 121

10. Enter the name to be associated with the stored number.
ABB xxxx
-zzzzzzzz
11. Press Hold key to set completed.
Set ABB
12. Press Speaker key to return to idle.
To enter a Forced Account Code before dialing the outside number:
(This feature is available for IP Terminal Only.) (SL1000)
1. With a telephone in an idle condition the display shows:
1-01 FRI 09:00AM
301 STA 301
LIST DIR ICM PROG
2. Press the List softkey.
- OR -
Press the Left Cursor key twice and skip step 3. The display shows:
LIST MENU
Redial CID
3. Press the CID softkey (Caller ID). The display shows:
##: xxxxxxxxxxxxx
mm-dd hh:mm
Store DEL
## = List Number
xx = Caller ID number
mm-dd hh:mm = incoming date and time
= Preview List
= Next List
Store = Store in List
DEL = Delete from List
4. Press the STORE softkey. The display shows:
##: xxxxxxxxxxxxx
mm-dd hh:mm
STA Abb
## = List Number
xx = Caller ID number
mm-dd hh:mm = incoming date and time
STA = Store in Station Speed Dial bin.
Abb = Store in System Speed Dial bin.
ISSUE 2.0
SL1000/SL1100
Features and Specifications Manual 1-111
C