Program
Number
Program Name Default Note
15-06-01 Trunk Access Map for Extensions 1
15-07-01 Programmable Function Keys Refer to Programming Manual.
15-13-01 Loop Keys - Outgoing Option 0: Programming Function Key No.
= 01-32
15-13-02 Loop Keys - Incoming Option 0: Programming Function Key No.
= 01-32
20-02-06 System Options for Multiline Telephones - Prese-
lection Time
5 (seconds)
20-02-09 System Options for Multiline Telephones - Dis-
connect Supervision
1
20-06-01 Class of Service for Extensions All extension port = Class 1
20-07-12 Class of Service Options (Administrator Level) -
Trunk Port Disable
COS 01~15 = 1
20-08-02 Class of Service Options (Outgoing Call Service)
- Trunk Outgoing Calls
COS 01~15 = 1
20-13-13 Class of Service Options (Supplementary Serv-
ice) - Continued Dialing (DTMF) Signal on ICM
Call
COS 01~15 = 1
21-01-15 System Options for Outgoing Calls - Outgoing
Disable on Incoming Line (Toll Restriction)
0
21-01-16 System Options for Outgoing Calls - Supervise
Dial Detection Timer
20 (seconds)
21-01-17 System Options for Outgoing Calls - Restriction
Digit in Outgoing Disable on Incoming Line
4
21-02-01 Trunk Group Routing for Extensions 1
21-15-01 Individual Trunk Group Routing for Extensions 0
24-02-07 System Options for Transfer - Trunk-to-Trunk
Transfer Release Warning Tone
1800 (seconds)
24-02-10 System Options for Transfer - Disconnect Trunk
to Trunk Timer
0 (seconds)
82-08-01
(MF Level)
Sidetone Volume Setup 6 (SL1100)
Operation
To place a call over a trunk group:
1. Go off-hook.
2. Dial 804.
3. Dial trunk group number (01~25).
4. Dial the number.
- OR -
1. At the Multiline Terminal, press the trunk group key (PRG 15-07-01 or SC 851:
02 +
group).
2. Dial the number.
To place a call using Trunk Group Routing:
1. Go off-hook.
SL1000/SL1100
ISSUE 2.0
1-130
Central Office Calls, Placing
C
To Next Page
Loading...
