NEC SL1000 - Page 149

Program
Number
Program Name Default Note
20-13-50 Class of Service Options (Supplementary
Service) - AIC Agent display which call is
from
COS 01~15 = 1
20-13-51 Class of Service Options (Supplementary
Service) - Number and Name appear in
the directory
COS 01~15 = 1
20-14-01 Class of Service Options for DISA - First
Digit Absorption (Delete First Digit Di-
aled)
COS 01~15 = 0
20-14-02 Class of Service Options for DISA -
Trunk Group Routing/ARS Access
COS 01~15 = 0
20-14-03 Class of Service Options for DISA -
Trunk Group Access
COS 01~15 = 0
20-14-04 Class of Service Options for DISA - Out-
going System Speed Dialing
COS 01~15 = 0
20-14-05 Class of Service Options for DISA - Oper-
ator Calling
COS 01~15 = 0
20-14-06 Class of Service Options for DISA - Inter-
nal Paging
COS 01~15 = 0
20-14-07 Class of Service Options for DISA - Ex-
ternal Paging
COS 01~15 = 0
20-14-08 Class of Service Options for DISA - Di-
rect Trunk Access
COS 01~15 = 0
20-14-09 Class of Service Options for DISA -
Forced Trunk Disconnect <Not for ISDN
T-point>
COS 01~15 = 0
20-14-10 Class of Service Options for DISA - Call
Forward Setting by Remote via DISA
COS 01~15 = 0
20-14-11 Class of Service Options for DISA -
DISA/Tie Trunk Barge-In
COS 01~15 = 0
20-14-12 Class of Service Options for DISA - Re-
trieve Park Hold
COS 01~15 = 0
Operation
To change an extension Class of Service (via Service Code 777) :
1. Press Speaker key.
2. Dial 777.
3. Dial the extension number you want to change.
You see: MODE1: nn
Press Hold key to leave the current value unchanged.
The extension you dial may be set to block your attempt to change their Class of Service.
4. Enter the Day 1 Mode Class of Service for the extension you selected in step 3 and press Hold
key.
You see: MODE2: nn
Press Hold key to leave the current value unchanged.
ISSUE 2.0 SL1000/SL1100
Features and Specifications Manual 1-139
C