NEC SL1000 - Page 157

Program Num-
ber
Program Name Default
21-06-01 Toll Restriction Table Data Setup - International Call Re-
striction Table
Tables 1~10 = No Setting
21-06-02 Toll Restriction Table Data Setup - International Call Per-
mit Code Table
Tables 1~20 = No Setting
21-06-03 Toll Restriction Table Data Setup - Maximum Number of
Digits Table Assignment
Tables 1~ 4 = 30
21-06-04 Toll Restriction Table Data Setup - Common Permit Code
Table
Table 1 ~ 10 = No Setting
21-06-05 Toll Restriction Table Data Setup - Common Restriction
Table
Tables 1~ 10 = No Setting
21-06-06 Toll Restriction Table Data Setup - Permit Code Table Table 1~4 = No Setting
21-06-07 Toll Restriction Table Data Setup - Deny Restriction Ta-
ble
Table 1~4 = No Setting
21-06-08 Toll Restriction Table Data Setup - PBX Access Code Table 1~4 = No Setting
21-21-01 Toll Restriction for Trunks (Seized Trunk Basis Setting) -
Restriction Class
1
35-02-01 SMDR Output Options - Toll Restricted Call 1
Operation
To place a trunk call if your system is Code Restricted:
1. Place call normally.
If your Code Restriction Class does not allow the number you dial, your call is cut off.
ISSUE 2.0 SL1000/SL1100
Features and Specifications Manual 1-147
C